The adapter lets you connect a bare drive with no enclosure, saving time and hassle. The USB 2.0 SATA/IDE Adapter features LED indicators that allow you to easily monitor status and activity updates, and is designed for durability and reliability.

1. Connect any 2.5' Serial ATA (SATA) / SSD or SATA II Hard Drive to your computer through an available USB 3.0 port on your desktop or laptop. Reverse compatible with USB 2.0 and 1.1, this Adapter is a perfect solution for data transfers or data backup! Inland USB 3.0 SATA Hard Drive Adapter Usually ships in 5-7 business days.
2. E-mail: support@inlandproduct.com You may send us an email directly to the email address above or by using the form below. When you contact us by email, please include as much information such as product's part/stock number, place of purchase, brief problem description, etc.
3. USB 2.0 TO SATA/IDE COMBO ADAPTER DRIVERS FOR WINDOWS DOWNLOAD - My rating for the quality of this product. I've never actually been compelled to write a review before but this adapter is great.
4. Make sure you are plugging the power adapter into the IDE-USB Adapter and the power plug is plugged directly into the wall socket and not thru a power strip or extension cord as this diminishes the power.When the drive is powered up, you can put your ear next to it and hear it spinning up and humming.

My rating for the quality of this product. I’ve never actually been compelled to write a review before but this adapter is great. Unfortunately there is no workaround in these situations. Please enter a headline for your review. Even a novice can do this.

From the largest data center to the smallest home office, Tripp Lite products keep your equipment running effectively and efficiently. In stock items will ship out next business adaptter.

We tailor our advice to your needs, including your level of knowledge and experience. Additional FAQs may be available on the U model support page. The DC plug on the adapter is a bit thigt so you may need to pull hard to get it out. Where To Buy ConXit.

USB 2.0 to SATA/IDE Combo Adapter for 2.5/3.5″ SSD/HDD

We have 2 of them now and will no doubt try the USB 3. Was able to retrieve everything off of the hard drive from a old computer.

combl Need a little help getting started? A jumper is a small plastic piece that slides on top of two pins to electrically short them together.

USB to SATA / IDE Combo Adapter –

The sector size is not bytes. Tripp Lites USB 2. Unfortunately there usb 2.0 to sata/ide combo adapter no workaround in these situations. Other than that, for the value I would definetly recomend it. Applications Service technicians who need to test or retrieve data from old hard drives Technicians who travel and deal with many different types of hard drives Connect uzb 2.

Please enter a headline for your review.

The jumpers switch the drive between Master, Slave, and Cable Select for most drives. The U is compatible with Windows, Mac, and Linux. Call us at or email presaleshelp tripplite. The saha/ide switch the drive between Master, Slave, and Cable Select for most drives.

Built in connectors for both 2. Network Switches Gigabit Ethernet Switches.

Write a review Need a little help getting started? Yes – 3 No – 1 Report. J-Micron software is included to allow you to quickly backup and restore sata/ude.

Inland Ethernet Adapter Driver

Model Number Select The sector size is not bytes. Works great completely satisfied with the product. You may block or delete all cookies from this site but parts of the site may not work. Tripp Lite make good products There are a number of reasons that older IDE drives may not be detected, including the following: Replaced the failing drive with the clone. Yes – 0 No – 0 Report. Is an important specification missing?

Tell us if something usb 2.0 to sata/ide combo adapter incorrect.

Need help with your purchase?

Inland Adapters Drivers

How-To Geek Forums / Windows 7

(Solved) - USB 2.0 to IDE or SATA adapter cable

Several years ago I purchased a set of 'USB to IDE or SATA adapter cables' made by StarTech.com. I used them several time on my old Windows XP computer but I never tried them on my Windows 7 computer until now. They still work fine when I connect an internal IDE hard drive using these cable through my USB port but when I attempted to connect an SATA internal hard drive I got an error telling me that Windows 7 could not find a driver. I went to StarTech.com web site looking for a driver for Windows 7 but when you go to their download section there is no driver to download. I tried contacting them by email well over a week ago and got no response even though when i completed there form to send the email it said I would get a reply within 48 hours. Does anyone know where I can get a driver for this set of cables that will make it work on Windows 7. I know that I can just open my computer and connect it internally but the reason I purchased these cables in the first place is so I will not have to do that. The driver cd that came with these cables does not have a driver that will work for Windows 7.

LarrySr,
found this from some feedback another user / owner of this device left ....

[quote]'Here's how to install it so it will work for you:
Have the drive turned on and running when you plug it into your (running) computer's USB. If you get a 'Found New Hardware' message, you're good. If not, click Start, and right click on My Computer, go to Device Manager, right click on Disk Drives and click Scan For Hardware Changes. After the scan, see if the drive shows up. If it doesn't, just reboot and it should show up. After the drive has been detected once, it will behave like a flash drive. Just always remember to use the 'Safely Remove Hardware' feature when you unplug the USB, and always be sure the drive is running when you plug in the USB.'[/quote]

it might be worth the shot and might do the trick for you. i stopped scouring the feedback when i found that but feel free to check some more incase someone else has another suggestion.
see here: http://www.newegg.com/Product/Product.aspx?Item=N82E16812200155

Thank you Vistual. I tried what you said and at first I thought it didn't work then I remembered that this is a new hard drive and it will not show up until I initialize it, assign a drive letter and partition it. Once I did that it now shows up. I thank you for helping me through this and jogging my memory.

i should be thanking you ...
might end up buying one of those things now!
LOL!

I find it very useful when I am fixing up old computers which I do a lot of. I pick up old computer that don't work, fix them up and find them new homes with families that cannot afford to purchase computer but need them for school work. Again; thank you.

Topic Closed

This topic has been closed to new replies.